With this post how you start a fashion design business in Nigeria, Do you know you can get grants and startup capital from G.Os and N.G.Os to start a fashion Design business? Yes it is correct. Read to the end of this post were the low level in and I will show how and where to apply for this grants

Do you really want to do this?  

Never do anything because you think you do not have other choice, no life itself is a choice. Before you agree to go for something you should try to ask yourself some useless questions.

From those answers you get you will be able to know your faith on if to start or not.

If it happen that you cant go on with how to start a fashion design business in Nigeria then try our other post on how to make money online in Nigeria

Ask yourself some questions and meet me down if you are in.

Wow! You made it welcome.

Why it could be good for you……

  • Do you know over a million persons from one department graduate every year. “Where dem want see work?”
  • I was discussing with a white man were my dad work, on how to apply for work with my result you know what he said “young man gone are the days we work with certificate, if you are not good at least have an idea we will brush you up”. Among all the millions that graduated it will be less than hundred that will attempt that interview.
  • Even if you don’t have the millions to run the business now, try to get the skill and the idea you sure will qualify for grants.
  • It will safe you the normal disappointment and frustration that most of our fashion designer put us these days.
  • You will also make good designs for yourself, your friends and your family members.

Since you have decided to go for it, what do you start with?

We will have to narrow this planning into 3level because everyone pocket can never be the same. We don’t want to neglect or ignore any body because we can’t tell who needs it now.

What we will need for the business.

capital money Little money Loyalty and commitment
machine Industrial machine Manual machine And your brain
office A big hall A small container Still under person
labor Multi-staffs Yourself and one apprentice Just your self

I will be using the table above throughout this post (how to start a fashion design business in Nigeria) for my analyses.

Check: how to start a computer Business Center in Nigeria

High level business:

whenever a person from this business level (High level business) as me how to start a fashion design business in Nigeria, I am very free while giving the person advice because I know that if decided to do it the capital won’t be a problem.

This is why before i council and body on business plain I always ask “how much are you willing to invest”. That will let me in on the level of the person thereby giving me clear picture of what and what to recommend.

It is sure and you should know that every business has requirement for actualization.

  • The first thing we always think about when someone make mention of business is the capital. Capital is a major factor for any startup business. In high level business you will need a large amount of capital of about N1,500,000.00 that’s really not much keep reading to see my estimate.
  • The second requirement is the sewing machine (Industrial machine). We only recommend Industrial machine our high level business because the machine gives you a perfect look and it has fault less often. You will need about 6-10 industrial machine which will cost you about N600,000.00. Do we really need that much? YES!


fashion disign business




  • Now it is time to get our office. This is the most sensible part of this business, if you get it wrong here it will be very difficult to bounce back. The location you will be fixing your office should be a place that appreciate fashion (your kind).

For you not to make any mistakes here you will have to call a consultant into the picture to help you monitor and feed you back with results.

If you decide you can do this yourself but put in mind that The process will take time 2 – 4weeks.

You should setup a facebook page and a blog to display your designs for promotion purposes.

To get a big office (hall) in a nice environment will cost N200,000.00 – N400,000.00

  • It’s now time to get multi-staffs (a lot of staffs). You will agree with me there are people with the skill but no capital for startup, get them to work for you.

How can I get the? Simple run both online and offline ads placement offline with hand bill and postal placement. You will also need capital for this. I can’t tell the price ratings.


  • You should try to settle the people working for you very well as this will go a long way in helping those that don’t have set up theirs. And paying them will reduce unemployment and many forms of criminal act in the country (Nigeria).


fashion disign business




You will also need some other smaller things. I bet you they won’t cost much.


We always advice high level business man and woman to offer a “wait and get service for twice the normal amount.

CHECK–> how to make money online in Nigeria

Middle level business:

You Might Like:  How To Start A Lucrative T-shirt Printing Business In Nigeria

Let’s keep an eye on our analyses table

capital money Little money Loyalty and commitment
machine Industrial machine Manual machine And your brain
office A big hall A small container Still under person
labor Multi-staffs Yourself and one apprentice Just your self


When the middle level business ask me same question how to start a fashion design business in Nigeria, I just tell them to beat as the can chow simple.

Whenever am concealing the middle level people i always let them know they can start small and step up. It’s just matter of time.

  • They will need capital just as the high level business, but the different is that it will not require as much capital as the high level business. So there is no need to be afraid. We will have to use money to buy and do what the high level business owners did but this will be on a smaller scale. Let’s just say N150,000.00. Hummm Yes it should be just fine.


  • The second requirement for the middle level business owner is the sewing machine (manual machine). The reason we pick a manual sewing machine is because of the capital at hand (capital). We will be needing just two manual sewing machine which will cost u almost N60,000.00.


fashion disign business




  • Now it is time to get our office or shop as it is wildly called. This is equally as sensible as the high level. You won’t try to get this wrong as it will make you regretting to ever invested a thing in this business. To get a good office/shop for your level will not be more then N40,000.00.


  • You will need one person to work with you. Get a person that wants to learn, this will cost you less and you will not have to worry about paying some.
fashion disign business




Don’t forget you will have to but some other tools to your work.


try this–> How to start a fashion design business in Nigeria

Low level business: These are the people without capital, machine and office. Here is what you should know. Try to be loyal and keep your head down to the person you are learning from. Remain under him and get the knowledge till you get startup.

fashion disign business





But let’s be real:

Did you see the chart up there? If high level can spend over 75% to get his businesses running. Would you want him to expect to get same result with the middle level business owners that were able to occupy just 20% and the chart.

The low level is not supposed to have a thing on the chart but a times he might have a little work that will make him little money.

We have done the main work for you, all the research has been taken care of. We compare both the industrial sewing machine and the manual sewing machine.

fashion disign business


fashion disign business



           Jiji N33,500                                                     Konga  N47,500



fashion disign business


fashion disign business



Jiji N60,000                                                             Konga  N55,235

with this post how to start a fashion design business in Nigeria you can compare between these product


                                         Some choice you could pick from

Janome 2212

is one of the best machines for users who want to try their hand in sewing.

With a selection of basic yet essential features and easy use, Janome 2212 can become your first helper in your career as a tailor. Plus, it’s pretty lightweight and very affordable.







Brother CS6000i

Brother CS6000i has already become a number one selling machine in many online stores. There are a few reasons for its immense popularity: it’s affordable, it’s lightweight, and it’s packed with lots of features, from an LCD display to over 60 types of stitches available.


fashion disign business




John Lewis JL110

This John Lewis sewing machine is a great choice for budget shoppers.

There are 14 stitches, which are more than enough for most sewing tasks, and the operation of the machine is so easy that a single read of the user manual will make you a very confident user.


fashion disign business




Singer Stylist 7258

Singer Stylist 7258 is an award-winning sewing machine that appeals to many beginners in sewing. While it may be not as affordable as other options on the market, its variety of features, including 100+ stitches and automatic needle threading system, make up for its higher price.

fashion disign business




try this–> Make Money Teaching People How To Make Money


Common Sewing Machine Problems and How To Solve Them


There’s nothing worse than working with an uncooperative sewing machine! Broken or tangled threads, skipped stitches, snapped needles—it can make for a very frustrating experience.

You Might Like:  How to Become a Model in Nigeria - Start Modelling Career.

But most of these issues can be resolved without taking your machine in for expensive repairs.

We’ve assembled a list of some of the most common sewing machine problems, and their solutions, to help you troubleshoot even while mid-project!


  1. Thread always bunching up under your fabric when sewing

If you’re seeing knots of extra thread on the underside of your sewing, remove your sewing from the machine. You may have to cut through all the extra thread to get it free.

Don’t simply pull it loose or you risk damaging the mechanism of your machine, not to mention your fabric!

Once your project has been freed, carefully remove all the cut bits of thread as well. Now you’re ready to identify the issue. Keep a scrap piece of your fabric on hand to test.



  1. Broken needles

This is a problematic issue that can be very annoying and could be dangerous as well. Always use a new needle for a new project. If a needle has a small sign of rust it could cause dull or hooked at the tip, which can damage what you are doing.

Make sure you’re using the right type of needle that fit in properly in the machine.  If your needle breaks or bends, stop sewing immediately.

Carefully remove the broken needle and put it in a container to be disposed of properly. Replace the needle with the correct type for your machine, being sure to install it according to your sewing machine’s manual. Re-thread, and continue your project.

If you’re using the correct needle, but you continue to have issues with breaking or bending, you may have underlying mechanical issues with the timing mechanism, which will require expert repair.

taking you through so things you should know of HOW TO START A FASHION DESIGN BUSINESS IN NIGERIA

  1. Fabric not feeding at all

Make sure if your machine has a drop-feed setting that it has not been activated, and that you don’t have embroidery or darning plate covering the feed dogs.

You’ll also want to be sure that your presser foot is down, and is set to the correct pressure for your fabric—too little or too much pressure results in a poor feed. When starting a seam, make sure the fabric is all the way under the needle before lowering your presser foot.


  1. Thread keeps breaking and breaking

Check the type of thread that you’re using. Delicate threads designed for hand sewing are not suitable for use in a sewing machine.

Your top and bottom threads should also be of the same weight. Re-thread your top thread, making sure your presser foot is up while threading. If you’re still having issues, lower the tension settings for your top thread.


  1. Machine is skipping most stitches

There are several possible reasons for your machine to skip stitches. First, check that your needle is installed correctly, not bent or otherwise damaged, and that you’re using the right type of needle for your project.

If the top thread is not reaching the bobbin, the threads will not lock properly, resulting in a skipped stitch. Re-thread your machine, both top and bobbin threads, and test.

If your machine is still skipping stitches, there may be an issue with the timing, which will require expert repairs.


  1. Bobbin tension not consistent

If you find yourself constantly adjusting the tension of your bobbin thread, check the bobbin itself. Plastic bobbins especially can wear, causing them to grow loose within the bobbin housing and making it difficult to maintain the correct tension. Try switching to a new metal bobbin and see if that resolves the issue.


  1. Seams in stretch fabrics coming out wavy

This one may be a sewing machine issue, but it can also be a problem with your technique. First, adjust the way you’re sewing. Make sure the entirety of your project is supported while you’re sewing.

The weight of the fabric alone can be enough to cause knits or other stretch fabrics to stretch while you’re sewing, so don’t let your fabric drape off the table while you work.

Let the feed dogs do all the work, and avoid pulling on the fabric to straighten it as you sew. Pin well before you start!

If you’re still seeing issues, adjust the pressure of your presser foot, or better yet, switch to a walking foot, which will feed the top and bottom layers of your fabric under the needle at the same rate, avoiding that distortion.


  1. Sewing machine seizes up or won’t sew

It’s not uncommon to need to give your machine a bit of help by turning the hand wheel, especially when you’re just getting a seam started.

However, if you need to force the wheel to turn, or the machine doesn’t pick up after a bit of assistance, stop what you’re doing! Likely, your fabric is too tough for your machine to sew, and continuing to try will damage your machine.

If you’re not working with a particularly tough fabric, make sure that your needle is installed correctly and is the right type. Remove it to check that it isn’t bent.

If you’re still having issues with your machine not sewing, check your manual for cleaning and maintenance tips. A build-up of fuzz and lint can make it tough for your machine’s mechanisms to work correctly.


  1. Needle comes unthreaded before sewing

How annoying! You just spent ages getting that thread through the eye of the needle, and as soon as you go to start sewing, it unthreads itself. Luckily, there’s an easy fix for this one.

Before threading your machine, just make sure that the needle is at its highest point.

You can do this by winding the hand wheel toward yourself (always wind it toward yourself since this advances the machine—winding it backward can cause threads to tangle) while watching the needle.

You Might Like:  How To Start A Profitable And Lucrative Homemade Shea Butter, Coconut oil And Honey Cream Business In Nigeria 2018.

Some machines also have an “up/down” function that allows you to raise or lower the needle automatically to its highest or lowest point.


  1. Fabric or threads are bunching at the start or ends of seams

Your seams should lay perfectly flat from one end to the other, but it’s not uncommon to see bunching or tangled threads at the ends.

This is caused by backstitching (or back-tacking) over the ends of the fabric, which changes the tensions your sewing machine experiences and causes tangles.

Avoid this by sewing an extra few millimeters into your fabric before backstitching at the start of seams, so that the backstitches are all made through fabric and not over the edge.

Similarly, when ending a seam, backstitch before you hit the edge, and then sew straight off the edge for a nice clean finish. in fashion design businessfabric or threads gives issue some times.


  1. Thread inconsistently knots, loosens, or tangles

This can be an infuriating problem to track down. One minute, everything’s sewing along just fine, and the next, your machine has tangled, skipped stitches, or knotted up the threads. If the issue is inconsistent, the problem is not likely to be your threading or tension settings.

Instead, the issue is probably fluffed! That’s right, the tiny bits of lint and dust that build up inside your sewing machine, especially in and around the bobbin case, can cause no end of difficulties if they end up in the wrong place at the wrong time.

Avoid the issue by regularly cleaning your machine per the instructions in your manual. Many sewing machine manufacturers recommend using brushes or vacuum attachments to remove lint;

while using cans of compressed air may seem like a good idea, they often have a tendency to drive tiny bits of lint further into the mechanism, where they can continue to wreak havoc. It’s best to follow the manufacturer’s instructions!


  1. Thread fraying, shredding, and breaking

If your thread looks as though it’s been through the mill, it’s probably an issue with your needle.

Make sure that your thread and needle sizes are compatible—your needle needs to be large enough for the thread you’re using to pass through the eye without catching or pulling.

If your needle and thread are incompatible, there’s a good chance one or the other isn’t right for your project anyway, so start by making sure you’ve got the right tools for your materials so as to get good result in this fashion design business.


  1. Irregularity in Fabric feed

Even seams are the mark of a good sewist, but it can be terribly difficult to manage if your machine isn’t drawing the fabric evenly. There are several possible reasons for uneven feed, and the culprit, not surprisingly, is usually the feed dogs.

If your machine is older, it’s possible the feed dogs may have worn down enough that they aren’t catching the fabric evenly.

They can typically be replaced, and your machine can be running good as new in no time. If your machine is new, try cleaning around the feed dogs. Lint tends to build up in this area, particularly if your machine has a drop-feed function.

If neither of these seems to be the issue, try increasing the pressure of your presser foot to make sure your fabric maintains even contact with the feed dogs.


  1. A lot of strange noises from machine.

Step one: stop sewing! As soon as you hear unexpected thumps or clunks coming from your machine, take your foot off the pedal. It’s likely that your machine just needs a good cleaning, so check through your manual for the recommended maintenance procedure.

Clean and oil your machine according to the instructions, and then give it test on a bit of scrap fabric. If there are still unusual noises, it’s best to take it to a repair shop to have it tuned up.


  1. The needle won’t move! Though the machine is running.

Though initially perplexing, this problem has a simple solution. Your machine is likely set in bobbin-winding mode, so check that the lever or winding post for your bobbin is in the correct position.


  1. Decorative stitch settings aren’t working

If your machine has a variety of decorative stitch settings, but they don’t seem to be working, the first step is to check your stitch length and width settings.

Many decorative stitches require specific settings in order to appear properly. Double check your manual to make sure that you’re using the right length and width for the stitch you’re trying to create.


  1. Seams are distorted

While a bit of unevenness in a seam can be dealt with by pressing, puckered and distorted seams may actually be a problem with your machine.most people in this fashion design business forget this First, check the weight of the thread you’re using.

A thick, stiff thread will cause distortion in lightweight fabrics, and will also throw off your tension settings. Tension is the second thing to check, if your thread is sufficiently lightweight for the project. Another possibility is uneven feed.

If your presser foot pressure is correct, and your feed dogs are working properly, try switching to a walking foot, which can help even out the feed for slippery or heavyweight fabrics.


A bit of regular maintenance can help prevent the frustrating issues, and your manual is an invaluable resource. It is very important that you know how to fix issues as you use you machine.


After now I hope we have answer the question how to start a fashion design business in Nigeria












Updated: April 21, 2018 — 1:27 am

Leave a Reply

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 5,720 other subscribers

smartincomepro © 2018